Doorgaan naar inhoud
EU = Gratis verzending vanaf €100,-
EU = Gratis verzending vanaf €100,-

Full custom | Vaypor + Li2

Bespaar 12%
Oorspronkelijke prijs €1.199,00
Huidige prijs €1.050,00

Gratis verzending (vanaf €100,-)!
30 dagen bedenktijd
Advies van experts

Laat het me weten als het weer op voorraad is

Deze schoen stuwt prestaties en luxe naar nieuwe hoogtes, is gemaakt van Kangeroo leer en is het hoogtepunt van de Bont Cycling serie.

Ontworpen om de beste prestaties te leveren, rit na rit, heeft de geheel nieuwe Vaypor + Li2 meer dan alleen een facelift gekregen met het nieuwste BOA® Li2 Fit-systeem voor een nog preciezere, veilige en micro-instelbare pasvorm. gerenommeerde constructiemethodes, combineert Vaypor+ de klassieke materialen met ''state of the art'' implementatie.

Voor diegenen die het allerbeste verlangen van hun lichaam en materiaal terwijl ze er goed uitzien, is de Vaypor+ dé perfecte schoen.

Waarom je waarschijnlijk een paar full-custom schoenen nodig hebt:

  • Eén voet is langer dan de andere.
  • Breede voeten.
  • Onregelmatige voeten.
  • Je hebt last van hamer- en/of klauwtenen.
  • Verschil tussen linker en rechter voet.
  • Je hebt graag je eigen ontwerp.

Wat je kunt customizen:

  • Kleuren en ontwerp
  • Naam opgeborduurd
  • BOA kleuren

2 manieren om je full-custom paar te krijgen:

  • Plaats een bestelling en ons team zal contact met u opnemen om de specifieke benodigdheden te bespreken en de afmetingen te overleggen.
  • Neem contact op voor vragen en benodigdheden om de procedure van het customizen in gang te zetten.

Advantages:

  • Pijnvrij fietsen: de anatomische perfectie van Bont Cycling om de juiste pasvorm te garanderen.
  • Sta dichter op de pedalen: Sta dichter op de pedalen: je voeten zullen veel dichter op je pedalen staan, wat je resultaten aanzienlijk zal verbeteren.
  • Efficiënt trappen: de energie wordt over je hele voet verdeelt.
  • Extreem sterke materialen: met de luxueuze en tevens compromisloze kracht van Kangoeroe leer.
  • 100% gepersonaliseerd: je krijgt op maat gemaakte schoenen die volledig rond je voeten zijn gevormd.

  • 100% carbon unidirectional monocoque chassis with Kangaroo Leather upper and leather lining.
  • Stack height: 3.6mm.
  • Air Vents: ventilation via air vents on front bumper and perforated upper
  • Innersole: EVA thermo-moldable. li>
  • Sole Guards: Replaceable.
  • Padding: memory foam.
  • Fit customisation: fully heat moldable chassis.
  • Cleat Mounting: standard 3-hole road pedal configuration with alignment grid and grip. Also available with 4-hole Speedplay sole on request.
  • Weight: 250 grams.
  • Semi and Full Custom available through custom programm.
  • BOA Li2 dial with  The Boa Guarantee, for the life of your shoes.

  • After placing the order or contacting us regarding your full-custom request, a Bont specialist from the Reins.cc team will contact you in order to plan the customization.
  • Production lead times are currently 7-8 weeks following confirmation of selections. Please allow additional time for delivery to your chosen address.
  • Reins.cc prioritizes DPD for shipping across Europe. Although it may use a local carrier if appropriate.
  • We provide a track & trace number for you.

First of all, you do not need to mold your shoes if they fit you straight out of the box!
This cycling shoe is the most heat moldable shoe on the market today. Bont’s resin is developed in house and has been perfected over 36 years to be an extremely stiff resin that becomes pliable at relatively low temperatures. The base of the shoe is moldable which means all stiff areas of the shoe can be molded in a standard oven. To mold your shoes, remove any cleats, laces or cleat mounting screws and innersole before molding. Failure to remove the innersole can result in it becoming deformed by the heat. Pre heat the oven to 70°C. Place the shoe in the oven for 20 minutes. Higher temperatures will void your warranty and may damage your boot. Caution: Do not place your feet in the hot shoes or you may burn your feet. Let them cool a little and test the shoe temperature with your hand before placing your feet in the shoes. Tighten the straps and allow to cool. If you have any lumps or bunions on your feet or if there are any areas causing discomfort, while the shoe is hot you can use the round end of a screwdriver to press out any part of the boot. You can heat mold the shoes as many times as you like.

  • 100% carbon unidirectional monocoque chassis with Kangaroo Leather upper and leather lining.
  • Stack height: 3.6mm.
  • Air Vents: ventilation via air vents on front bumper and perforated upper
  • Innersole: EVA thermo-moldable. li>
  • Sole Guards: Replaceable.
  • Padding: memory foam.
  • Fit customisation: fully heat moldable chassis.
  • Cleat Mounting: standard 3-hole road pedal configuration with alignment grid and grip. Also available with 4-hole Speedplay sole on request.
  • Weight: 250 grams.
  • Semi and Full Custom available through custom programm.
  • BOA Li2 dial with  The Boa Guarantee, for the life of your shoes.

  • After placing the order or contacting us regarding your full-custom request, a Bont specialist from the Reins.cc team will contact you in order to plan the customization.
  • Production lead times are currently 7-8 weeks following confirmation of selections. Please allow additional time for delivery to your chosen address.
  • Reins.cc prioritizes DPD for shipping across Europe. Although it may use a local carrier if appropriate.
  • We provide a track & trace number for you.

First of all, you do not need to mold your shoes if they fit you straight out of the box!
This cycling shoe is the most heat moldable shoe on the market today. Bont’s resin is developed in house and has been perfected over 36 years to be an extremely stiff resin that becomes pliable at relatively low temperatures. The base of the shoe is moldable which means all stiff areas of the shoe can be molded in a standard oven. To mold your shoes, remove any cleats, laces or cleat mounting screws and innersole before molding. Failure to remove the innersole can result in it becoming deformed by the heat. Pre heat the oven to 70°C. Place the shoe in the oven for 20 minutes. Higher temperatures will void your warranty and may damage your boot. Caution: Do not place your feet in the hot shoes or you may burn your feet. Let them cool a little and test the shoe temperature with your hand before placing your feet in the shoes. Tighten the straps and allow to cool. If you have any lumps or bunions on your feet or if there are any areas causing discomfort, while the shoe is hot you can use the round end of a screwdriver to press out any part of the boot. You can heat mold the shoes as many times as you like.

Why choose Reins.cc?

  • Ordered before 15:00 = shipped today from the Netherlands.
  • Always 100% satisfaction guarantee
  • Pay safe with Credit Card and many other European payment options.
  • Service from experts, which are always there for you.
  • 30 days consideration time for cash back.

our store

Not around the corner? We bring the physical shop experience online!