Skip to content
€100 = FREE SHIPPING
€100 = FREE SHIPPING

Riot Buckle Black/White

Sold out
€109,00

Free Shipping (from €100,-)!
30 days consideration time
Advice frome experts

Notify me when back in stock

The Bont Riot Buckle, renowned for it’s world-class performance and anatomical power transfer platform is now available to the masses.

Delivering competition-level fit and construction with a micro-adjustable buckle and Velcro retention system, the all-new Riot takes entry-level road cycling shoes to the next level.

Advantages:

  • Cycling without pain: the anatomical perfection of Bont Cycling’s last to ensure correct fit.
  • Fiberglass Construction: with anti-stretch Microfibre upper.
  • Perfect entry level: great combination of an entry level shoe with technical pro features.
  • Fully heat moldable: if needed, you can customise your fit by heat molding your shoe.

  • Fiberglass Construction with anti-stretch Microfibre upper.
  • Stack height: 4.8mm.
  • Air Vents: ventilated microfibre inserts featuring microresh inserts.
  • Innersole: comfort.
  • Sole Guards: replaceable.
  • Fit customisation: fully heat moldable chassis..
  • Cleat Mounting: 3 Hole Look Configuration.
  • Closure System: Z Form Velcro and Micro Adjustable Buckle.
  • Weight: 295 grams (size42).

  • Ordered before 15:00? We ship from the Netherlands TODAY.
  • Delivery time between 1-7 working days. 
  • Over €100? We ship throughout whole Europe for FREE. 
  • We provide you with tracking service. 
  • Consideration time is 30 days. We just send you the money back. 

To choose the right size, please go to the Choose your size page.

You have irregular feet? Try and have a look at the Custom Made Page.

First of all, you do not need to mold your shoes if they fit you straight out of the box!
This cycling shoe is the most heat moldable shoe on the market today. Bont’s resin is developed in house and has been perfected over 36 years to be an extremely stiff resin that becomes pliable at relatively low temperatures. The base of the shoe is moldable which means all stiff areas of the shoe can be molded in a standard oven. To mold your shoes, remove any cleats, laces or cleat mounting screws and innersole before molding. Failure to remove the innersole can result in it becoming deformed by the heat. Pre heat the oven to 70°C. Place the shoe in the oven for 20 minutes. Higher temperatures will void your warranty and may damage your boot. Caution: Do not place your feet in the hot shoes or you may burn your feet. Let them cool a little and test the shoe temperature with your hand before placing your feet in the shoes. Tighten the straps and allow to cool. If you have any lumps or bunions on your feet or if there are any areas causing discomfort, while the shoe is hot you can use the round end of a screwdriver to press out any part of the boot. You can heat mold the shoes as many times as you like.

  • Fiberglass Construction with anti-stretch Microfibre upper.
  • Stack height: 4.8mm.
  • Air Vents: ventilated microfibre inserts featuring microresh inserts.
  • Innersole: comfort.
  • Sole Guards: replaceable.
  • Fit customisation: fully heat moldable chassis..
  • Cleat Mounting: 3 Hole Look Configuration.
  • Closure System: Z Form Velcro and Micro Adjustable Buckle.
  • Weight: 295 grams (size42).

  • Ordered before 15:00? We ship from the Netherlands TODAY.
  • Delivery time between 1-7 working days. 
  • Over €100? We ship throughout whole Europe for FREE. 
  • We provide you with tracking service. 
  • Consideration time is 30 days. We just send you the money back. 

To choose the right size, please go to the Choose your size page.

You have irregular feet? Try and have a look at the Custom Made Page.

First of all, you do not need to mold your shoes if they fit you straight out of the box!
This cycling shoe is the most heat moldable shoe on the market today. Bont’s resin is developed in house and has been perfected over 36 years to be an extremely stiff resin that becomes pliable at relatively low temperatures. The base of the shoe is moldable which means all stiff areas of the shoe can be molded in a standard oven. To mold your shoes, remove any cleats, laces or cleat mounting screws and innersole before molding. Failure to remove the innersole can result in it becoming deformed by the heat. Pre heat the oven to 70°C. Place the shoe in the oven for 20 minutes. Higher temperatures will void your warranty and may damage your boot. Caution: Do not place your feet in the hot shoes or you may burn your feet. Let them cool a little and test the shoe temperature with your hand before placing your feet in the shoes. Tighten the straps and allow to cool. If you have any lumps or bunions on your feet or if there are any areas causing discomfort, while the shoe is hot you can use the round end of a screwdriver to press out any part of the boot. You can heat mold the shoes as many times as you like.

Why choose Reins.cc?

  • Ordered before 15:00 = shipped today from the Netherlands.
  • Always 100% satisfaction guarantee
  • Pay safe with Credit Card and many other European payment options.
  • Service from experts, which are always there for you.
  • 30 days consideration time for cash back.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

our store

Not around the corner? We bring the physical shop experience online!