Skip to content
Europe = Free shipping from €100,-
Europe = Free shipping from €100,-

Helix White

Save 13%
Original Price €425,00
Current Price €369,00

Free Shipping (from €100,-)!
30 days consideration time
Advice frome experts

Notify me when back in stock

The gold standard in performance footwear, the Bont Cycling Helix features our race-proven anatomic fit with a reimagined BOA closure system.

Tipping the scales at a competitive 260g per shoe, the true Bont Cycling difference comes via the fully heat moldable chassis and industry-leading 3.6mm stack height.

You think you’re close to the pedal spindle in your current shoes? The Bont Cycling Helix will get you closer. Experience performance and comfort without compromise like never before.

Limited stock! Please beware that we have a limited stock for Helix so feel free to ask for availability!

Double wide? Please note that the price increases with €50,- and for most sizes there is a delivery time of 6 weeks. Feel free to ask for information as well.

Speedplay soles? Go to SEMI-CUSTOM

Advantages:

  • Cycling without pain: the anatomical perfection of Bont Cycling’s last to ensure correct fit.
  • Pull & push efficiently: move  your legs, feet and shoes efficiently, as one unit.
  • All energy in one carbon chassis: this shoe is made out of one entire carbon chassis, which divides the energy all over your feet.
  • Extremely light shoes: only 260gr
  • Fully heat moldable: if needed, you can customise your fit by heat molding your shoe.

  • Weight: 260gr (size 42)
  • 100% carbon fiber construction utilising hand-laid unidirectional carbon from Toray of Japan and Bont Cycling’s proprietary heat molding technology.
  • Industry-leading 3.6mm stack height (sole thickness) for a closer connection to the pedal, more rounded pedal strokes, improved stability and injury prevention.
  • Durolite upper supported by an embedded anti-stretch fabric for a consistent fit across the lifetime of the shoes.
  • Comfortable faux suede liner with lightweight padding.
  • Frontal Air Vents for breathability in all-weather conditions.
  • Innersole: EVA thermo-moldable with built-in inner padding.
  • Sole Replaceable heel and toe guards.
  • 316 marine grade stainless steel hardware for improved removal and replacement of cleat t-nuts and heel pads.
  • Cleat Mounting: standard 3-hole road pedal configuration with alignment grid and grip. Also available with 4-hole Speedplay sole on request.
  • Semi and Full Custom available through custom programm.
  • BOA Li2 dial with  The Boa Guarantee, for the life of your shoes.

  • Ordered before 15:00? We ship from the Netherlands TODAY.
  • Delivery time between 1-7 working days. 
  • Over €100? We ship throughout whole Europe for FREE. 
  • We provide you with tracking service. 
  • Consideration time is 30 days. We just send you the money back. 

To choose the right size, please go to the Choose your size page.

You have irregular feet? Try and have a look at the Custom Made Page.

First of all, you do not need to mold your shoes if they fit you straight out of the box!
This cycling shoe is the most heat moldable shoe on the market today. Bont’s resin is developed in house and has been perfected over 36 years to be an extremely stiff resin that becomes pliable at relatively low temperatures. The base of the shoe is moldable which means all stiff areas of the shoe can be molded in a standard oven. To mold your shoes, remove any cleats, laces or cleat mounting screws and innersole before molding. Failure to remove the innersole can result in it becoming deformed by the heat. Pre heat the oven to 70°C. Place the shoe in the oven for 20 minutes. Higher temperatures will void your warranty and may damage your boot. Caution: Do not place your feet in the hot shoes or you may burn your feet. Let them cool a little and test the shoe temperature with your hand before placing your feet in the shoes. Tighten the straps and allow to cool. If you have any lumps or bunions on your feet or if there are any areas causing discomfort, while the shoe is hot you can use the round end of a screwdriver to press out any part of the boot. You can heat mold the shoes as many times as you like.

  • Weight: 260gr (size 42)
  • 100% carbon fiber construction utilising hand-laid unidirectional carbon from Toray of Japan and Bont Cycling’s proprietary heat molding technology.
  • Industry-leading 3.6mm stack height (sole thickness) for a closer connection to the pedal, more rounded pedal strokes, improved stability and injury prevention.
  • Durolite upper supported by an embedded anti-stretch fabric for a consistent fit across the lifetime of the shoes.
  • Comfortable faux suede liner with lightweight padding.
  • Frontal Air Vents for breathability in all-weather conditions.
  • Innersole: EVA thermo-moldable with built-in inner padding.
  • Sole Replaceable heel and toe guards.
  • 316 marine grade stainless steel hardware for improved removal and replacement of cleat t-nuts and heel pads.
  • Cleat Mounting: standard 3-hole road pedal configuration with alignment grid and grip. Also available with 4-hole Speedplay sole on request.
  • Semi and Full Custom available through custom programm.
  • BOA Li2 dial with  The Boa Guarantee, for the life of your shoes.

  • Ordered before 15:00? We ship from the Netherlands TODAY.
  • Delivery time between 1-7 working days. 
  • Over €100? We ship throughout whole Europe for FREE. 
  • We provide you with tracking service. 
  • Consideration time is 30 days. We just send you the money back. 

To choose the right size, please go to the Choose your size page.

You have irregular feet? Try and have a look at the Custom Made Page.

First of all, you do not need to mold your shoes if they fit you straight out of the box!
This cycling shoe is the most heat moldable shoe on the market today. Bont’s resin is developed in house and has been perfected over 36 years to be an extremely stiff resin that becomes pliable at relatively low temperatures. The base of the shoe is moldable which means all stiff areas of the shoe can be molded in a standard oven. To mold your shoes, remove any cleats, laces or cleat mounting screws and innersole before molding. Failure to remove the innersole can result in it becoming deformed by the heat. Pre heat the oven to 70°C. Place the shoe in the oven for 20 minutes. Higher temperatures will void your warranty and may damage your boot. Caution: Do not place your feet in the hot shoes or you may burn your feet. Let them cool a little and test the shoe temperature with your hand before placing your feet in the shoes. Tighten the straps and allow to cool. If you have any lumps or bunions on your feet or if there are any areas causing discomfort, while the shoe is hot you can use the round end of a screwdriver to press out any part of the boot. You can heat mold the shoes as many times as you like.

Why choose Reins.cc?

  • Ordered before 15:00 = shipped today from the Netherlands.
  • Always 100% satisfaction guarantee
  • Pay safe with Credit Card and many other European payment options.
  • Service from experts, which are always there for you.
  • 30 days consideration time for cash back.

Customer Reviews

Based on 4 reviews
75%
(3)
25%
(1)
0%
(0)
0%
(0)
0%
(0)
I
Ingo Goeldner

Best cycling shoes ever. Great colour and perfect fit

M
Martin G.

Looks very wide due to the internal cable routing. Still a great shoe as Bont‘s are always.

P
Peter Bennett

Stiffer than Shimano or Specialized, better ventilated, single Boa is amazingly simple and look amazing

S
Steven D.

Mag wat kosten maar dan heb je ook wat. Schoenen precies zoals beloofd.

our store

Not around the corner? We bring the physical shop experience online!