Skip to content
Europe = Free shipping from €100,-
Europe = Free shipping from €100,-

Vaypor 2023 White

Save 11%
Original Price €450,00
Current Price €399,00

Free Shipping (from €100,-)!
30 days consideration time
Advice frome experts

Notify me when back in stock

The new Vaypor 2023 comes with the latest developments from Bont Cycling. The Vaypor 2023 is for the rider who demands it all as it is designed to deliver the absolute best in performance.

This presents a huge opportunity to create new Bont Cycling lovers and reignite the passion from existing riders. Built around an all-new anatomical design, the Vaypor delivers the best performance with a reimagined fit and feel for new levels of comfort and energy transfer.

Built around a lower profile hand-made unidirectional carbon fiber base, the Vaypor gives a comfortable feeling for new riders with a ‘slide and ride’ fit and feel. Thanks to its redesigned chassis, the Vaypor 2023 is designed to feel lightweight and ultra-comfortable straight out of the box so riders can reach their maximum from the very first ride.

We’re calling this one “Bont Cycling for every rider” because it truly is a shoe that when you try it you instantly feel like it’s the shoe for you. The Vaypor simply works immediately and will undoubtedly become a favourite to lot’s of cyclists.

Most of the sizes and colors are in stock. However, some sizes might take a little more to be delivered. Feel free to ask for delivery time.

Advantages:

  • Cycling without pain: the anatomical perfection of Bont Cycling’s last to ensure correct fit.
  • Pull & push efficiently: move your legs, feet and shoes efficiently, as one unit.
  • All energy in one carbon chassis: this shoe is made out of one entire carbon chassis, which devides the energy all over your feet.
  • Extremely light shoes: Only 200gr.
  • Fully heat moldable: if needed, you can customise your fit by heat molding your shoe.

  • 100% carbon fiber construction utilising hand-laid unidirectional carbon from Toray of Japan and Bont Cycling’s proprietary heat molding technology.
  • Ultralight and supportive Japanese Durolite upper for improved breathability, comfort and performance.
  • Comfortable honeycomb fabric liner with lightweight padding and anti-stretch mesh for a cool and comfortable fit across the entire day.
  • Industry-leading 3.6mm stack height (sole thickness) for a closer connection to the pedal, more rounded pedal strokes, improved stability and injury prevention.
  • Front and rear drainage vents for breathability and water clearance across all-weather conditions.
  • Bont Cycling by Cobra9 innersole with carbon core and dual-density EVA.
  • Replaceable heel guards with 316 marine grade stainless steel fittings.
  • Carbon steel cleat t-nut hardware for longlasting and hassle-free cleat installation and adjustment.
  • Two widths with improved foot suitability across different shapes and types: Standard and wide.
  • Cleat Mounting: Slotted 3-hole road pedal configuration with alignment grid and grip with increase cleat adjustment forward and rearward, when compared to a fixed hole system.
  • Weight: 200gr (size 42)
  • BOA Li2 Dial with  The Boa Guarantee, for the lifetime of your shoes.

  • Ordered before 15:00? We ship from the Netherlands TODAY.
  • Delivery time between 1-7 working days. 
  • Over €100? We ship throughout whole Europe for FREE. 
  • We provide you with tracking service. 
  • Consideration time is 30 days. We just send you the money back. 

To choose the right size, please go to the Choose your size page.

You have irregular feet? Try and have a look at the Custom Made Page.

First of all, you do not need to mold your shoes if they fit you straight out of the box!
This cycling shoe is the most heat moldable shoe on the market today. Bont’s resin is developed in house and has been perfected over 36 years to be an extremely stiff resin that becomes pliable at relatively low temperatures. The base of the shoe is moldable which means all stiff areas of the shoe can be molded in a standard oven. To mold your shoes, remove any cleats, laces or cleat mounting screws and innersole before molding. Failure to remove the innersole can result in it becoming deformed by the heat. Pre heat the oven to 70°C. Place the shoe in the oven for 20 minutes. Higher temperatures will void your warranty and may damage your boot. Caution: Do not place your feet in the hot shoes or you may burn your feet. Let them cool a little and test the shoe temperature with your hand before placing your feet in the shoes. Tighten the straps and allow to cool. If you have any lumps or bunions on your feet or if there are any areas causing discomfort, while the shoe is hot you can use the round end of a screwdriver to press out any part of the boot. You can heat mold the shoes as many times as you like.

  • 100% carbon fiber construction utilising hand-laid unidirectional carbon from Toray of Japan and Bont Cycling’s proprietary heat molding technology.
  • Ultralight and supportive Japanese Durolite upper for improved breathability, comfort and performance.
  • Comfortable honeycomb fabric liner with lightweight padding and anti-stretch mesh for a cool and comfortable fit across the entire day.
  • Industry-leading 3.6mm stack height (sole thickness) for a closer connection to the pedal, more rounded pedal strokes, improved stability and injury prevention.
  • Front and rear drainage vents for breathability and water clearance across all-weather conditions.
  • Bont Cycling by Cobra9 innersole with carbon core and dual-density EVA.
  • Replaceable heel guards with 316 marine grade stainless steel fittings.
  • Carbon steel cleat t-nut hardware for longlasting and hassle-free cleat installation and adjustment.
  • Two widths with improved foot suitability across different shapes and types: Standard and wide.
  • Cleat Mounting: Slotted 3-hole road pedal configuration with alignment grid and grip with increase cleat adjustment forward and rearward, when compared to a fixed hole system.
  • Weight: 200gr (size 42)
  • BOA Li2 Dial with  The Boa Guarantee, for the lifetime of your shoes.

  • Ordered before 15:00? We ship from the Netherlands TODAY.
  • Delivery time between 1-7 working days. 
  • Over €100? We ship throughout whole Europe for FREE. 
  • We provide you with tracking service. 
  • Consideration time is 30 days. We just send you the money back. 

To choose the right size, please go to the Choose your size page.

You have irregular feet? Try and have a look at the Custom Made Page.

First of all, you do not need to mold your shoes if they fit you straight out of the box!
This cycling shoe is the most heat moldable shoe on the market today. Bont’s resin is developed in house and has been perfected over 36 years to be an extremely stiff resin that becomes pliable at relatively low temperatures. The base of the shoe is moldable which means all stiff areas of the shoe can be molded in a standard oven. To mold your shoes, remove any cleats, laces or cleat mounting screws and innersole before molding. Failure to remove the innersole can result in it becoming deformed by the heat. Pre heat the oven to 70°C. Place the shoe in the oven for 20 minutes. Higher temperatures will void your warranty and may damage your boot. Caution: Do not place your feet in the hot shoes or you may burn your feet. Let them cool a little and test the shoe temperature with your hand before placing your feet in the shoes. Tighten the straps and allow to cool. If you have any lumps or bunions on your feet or if there are any areas causing discomfort, while the shoe is hot you can use the round end of a screwdriver to press out any part of the boot. You can heat mold the shoes as many times as you like.

Why choose Reins.cc?

  • Ordered before 15:00 = shipped today from the Netherlands.
  • Always 100% satisfaction guarantee
  • Pay safe with Credit Card and many other European payment options.
  • Service from experts, which are always there for you.
  • 30 days consideration time for cash back.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)