Riot +

• Carbon Composite Construction with Microfiber Upper.
• Stack height: 4.8mm.
• Air Vents: ventilations holes through upper and mesh inserts.
• Innersole: comfort.
• Sole Guards: replaceable.
• Fit customisation: Fully heat moldable chassis.
• Cleat Mounting: 3 Hole Configuration.
• Closure system: BOA dial and Z form velcro strap.
• Weight: 280 grams.

• Ordered before 15:00? We ship from the Netherlands TODAY.
• Delivery time between 1-7 working days. 
• Over € 50? We ship throughout whole Europe for FREE. 
• We provide you with tracking service. 
• Consideration time is 30 days. We just send you the money back. 

To choose the right size, please go to the Choose your Size page.

You have irregular feet? Try and have a look at the Custom Made Page.

First of all, you do not need to mold your shoes if they fit you straight out of the box!

This cycling shoe is the most heat moldable shoe on the market today. Bont’s resin is developed in house and has been perfected over 36 years to be an extremely stiff resin that becomes pliable at relatively low temperatures. The base of the shoe is moldable which means all stiff areas of the shoe can be molded in a standard oven. To mold your shoes, remove any cleats, laces or cleat mounting screws and innersole before molding. Failure to remove the innersole can result in it becoming deformed by the heat. Pre heat the oven to 70°C/160°F. Place the shoe in the oven for 20 minutes. Higher temperatures will void your warranty and may damage your boot. Caution: Do not place your feet in the hot shoes or you may burn your feet. Let them cool a little and test the shoe temperature with your hand before placing your feet in the shoes. Tighten the straps and allow to cool. If you have any lumps or bunions on your feet or if there are any areas causing discomfort, while the shoe is hot you can use the round end of a screwdriver to press out any part of the boot. You can heat mold the shoes as many times as you like.