Heel Pad Set

We ship from the Netherlands. Delivery times may vary depending on country and exact location, however, Reins.cc orders normally take anywhere from 1-12 days to be delivered. Items (sizes) that are not in stock might take some days longer, which will be communicated while purchasing. Exact delivery details on semi- and full-custom shoes will be followed up with the customer while going through the customization- and order process.

Reins.cc prioritizes DPD for shipping across Europe, including tracking service. Although it may use a local carrier if appropriate.

1. Always check if there is a match with the style of the current shoes and check that all parts have been received correctly: 2x heel cushions, 2x heel cushion bolts.

2. Use a screwdriver to loosen the heel pad bolt from the bottom of the shoe. If the bolt cannot be removed easily, remove the insole and check that the T-nut (NUTS) of the sole pad is in the correct position. When turning, it can be held securely in place using circlip pliers or similar. Then replace the T-nuts (T-NUTS) of the sole pad.

3. (IF APPLICABLE) To keep everything perfectly in place, remove existing heel pads with a small amount of acetone to help dissolve the adhesive and hold it in place.

4. Clean the surface thoroughly with acetone or nail polish remover on a cotton pad or the like. To go to the next step, it must be completely dry and evaporated. 

5. The supplied bolt should be pushed through the bolt hole of the heel pad and then apply a small amount of LOCTITE 401 to the surface of the heel pad.

6. Insert one or two LOCTITE threadlocker blue 242 or equivalent into the T-Nut (T-NUTS) screw carrier of the sole pad. This prevents it from coming loose.

7. Mount the heel pad on the sole and make sure it is aligned with the original heel pad.

8. Tighten the bolt on the bottom of your shoe. Do this carefully the heel pad is made of rubber and the bolt is made of steel. Please don’t pull it too tight!

9. Repeat for matching shoe.

10. Before you plan to go cycling again. Let it dry for at least 12 hours.

Still can’t figure it out? Contact us